The Navy Door

Decorate. Repurpose. Restore.

by

How I Painted My Brand New Kitchen Cabinets with General Finishes Milk Paint

Last year after looking at so many different homes, we decided that we were going to build a house. As we were picking out the finishes for the house, I wasn’t crazy about any of the color selections that were being offered for the kitchen cabinets. The one cabinet I liked was completely outside the budget. So we agreed that we would just get the natural color cabinets and paint them. Prior to this decision I had already done some research on painting wood pieces and cabinets, so I thought I could do this! Mind you, I have never painted cabinets before, and I must say I learned a lot in the process. In this post I’m going to show you what I did to my new cabinets, and I absolutely love walking into my kitchen every day!

Here are a few pictures of my cabinets when we first unpacked them. For me, it was much easier to spray the cabinets before they were hung, if you have the opportunity to do so. I did have to touch up some paint and add the top coat after they were hung. You can paint your cabinets if they’re already hung, but I found it to be a little more work than when they were not hung.

After unpacking the cabinets we followed the lay out of the kitchen cabinets and determined what panels would be showing and which ones would be hidden (against the wall or another cabinet). By planning this out, it helped save on paint, and most of all time! We then lightly sanded the parts of the cabinet that I was painting, with a 220 grit to remove the shine, then wiped them down with a 50% rubbing alcohol and 50% water mixture, to remove all dust for a clean surface to spray on.

I had a lot of cabinets to paint and a limited time to do them before the carpenter was scheduled to put them up. So I decided to use a spray gun called Wagner Home Decor HVLP Stationary Sprayer at Home Depot. I purchased the unit that came with a tent (only $20 more). This sprayer was easy to use, but may not have been the right choice for such a large project. There were a few times that the sprayer would either get stuck, or would not evenly spray. After a little more research I learned that if I strained the milk base paint with a filter from Home Depot, which is where I purchased mine, I had fewer issues with the spray gun.

You’ll see in the images below, that we used Green FrogTape to tape the inside of the cabinet off, to keep it clean. I took the tape and stuck it around inside trim of the cabinet, with the sticky side of the tape facing out, then cut a piece of plastic drop cloth that I purchased from the Dollar Tree, to the green tape.  You’ll see I also used the tape to cover any holes or gaps to prevent paint from spraying into the cabinets.

You can see in the second picture above that it looks as if the paint was running. That area seemed to be skipped over when we were sanding, which is why it looks like that. Lucky the General Finishes Milk Base Paint is very forgiving, thankfully! When you apply light coats of the milk base paint with the spray gun, it gives it an amazing finish. I applied three coats of paint, which I mixed with two colors to make the color I used, and three coats of High Performance top coat. I wouldn’t recommend using any less, from my personal experience.

It was hard for me to find the color I wanted.  At first I was going to do Queenstown Gray or Driftwood but our whole house is painted two different shades of gray. As I debated on what color to pick, it occurred to me that I really wanted something rich, that stood out, but flowed with our house too. It took me a few attempts, but here is how I figure it out.

It’s very scientific, I know! I just took a drop of all the colors I liked, and started mixing one or two drops together until I fell in love with the color I created, which was one part of Coastal Blue and two parts of Queenstown Gray. I thought I mixed enough the first time for my project, but actually come up short. My suggestion is to buy a little more than you think you’ll need and mix all at the same time. For my project, I bought about a gallon and a quart of paint.

Here is what the cabinets looked like after they installed them. Although I really liked the dull look, to keep the paint in its best condition you have to apply a topcoat. I used three coats of the High Performance topcoat. General Finishes does have a Flat Out topcoat which I think would be a great topcoat for the cabinets, if you were looking for a duller/flatter look. They recommend that you use the Flat Out on top of the high performance topcoat.

Here are the kitchen cabinets completely finished with topcoat and hardware. I’ll share the hardware refinishing information with you too in my next post!

Please leave any questions or comments below, as I would be more then happy to help!

Xo Christine 

by

How I Painted My Brand New Bathroom Cabinets With General Finishes Milk Paint

If you happened to have read my post on How I Painted My Brand New Kitchen Cabinets With General Finishes Milk Paint, you will find that the process is the same, but I thought it would be helpful to give you more examples on how to save money repurposing the items you already have in your home.

Here are a few pictures of my cabinets when we first unpacked them. For me, it was much easier to spray the cabinets before they were hung, if you have the opportunity to do so. I did have to touch up some paint and add the topcoat after they were hung. You can paint your cabinets if they’re already hung, but I found it to be a little more work than when they were not hung.

After unpacking the cabinets and separating the bathroom cabinets from the kitchen cabinets, I then lightly sanded the parts of the cabinet that I was painting, with a 220 grit to remove the shine, then wiped them down with a 50% rubbing alcohol and 50% water mixture, to remove all dust for a clean surface to spray on.

I had a lot of cabinets to paint and a limited time to do them before the carpenter was scheduled to put them up. So I decided to use a spray gun called Wagner Home Decor HVLP Stationary Sprayer at Home Depot. I purchased the unit that came with a tent (only $20 more). This sprayer was easy to use but may not have been the right choice for such a large project. There were a few times that the sprayer would either get stuck or would not evenly spray. After a little more research I learned that if I strained the milk base paint with a filter from Home Depot, which is where I purchased mine, I had fewer issues with the spray gun.

You’ll see in the images below, which are actually my kitchen cabinets but that’s because it was hard to take a picture in the bathroom, as the cabinets were already mounted. The process is the same as in the picture below. I used Green FrogTape to tape the inside of the cabinet off, to keep it clean. I took the tape and stuck it around the inside of the trim of the cabinet, with the sticky side of the tape facing out, then cut a piece of plastic drop cloth that I purchased from the Dollar Store, to the green tape.  You’ll see I also used the tape to cover any holes or gaps to prevent paint from spraying into the cabinets.

When you apply light coats of the milk base paint with the spray gun, it gives it an amazing finish. I applied three coats of paint, and three coats of High Performance topcoat. I wouldn’t recommend using any less, from my personal experience.

I knew that I wanted a gray color cabinet in my bathrooms, but General Finishes has so many great colors to pick from that it was still hard to decide. I finally went with Driftwood because it was a lighter shade of gray and I thought it would look great with the finishes I wanted.

General Finishes color chart 2014

Here are my finished bathroom cabinets with the hardware that I also refinished in this post Knobs, Knobs, Knobs!

What do you think? I love how both the cabinets and hardware came out! Please leave any questions or comments below, I would be more than happy to help.

Xo Christine

by

How To Repurpose an Office Chair

I love to find the new look in old pieces of furniture, lamps, glass bottles, you name it, and I can find a new use for it. So when my husband asked me to help update his office, on a budget, I jumped at the chance to see what I could do on the cheap that would look amazing. In this post, I’m going to show you how I made his 1990’s office chair look modern and masculine.

Here is the chair from my husband’s office. They were all in great shape, just really dated. He was thinking that he would just throw them out and buy new ones until I told him I can save you a ton of money just by covering them with new fabric.

I had seven of these chairs to cover, so I did what any normal person would do, and opened my Amazon app to order a bolt of fabric! I chose a Marine vinyl cognac color indoor/outdoor fabric, that I linked to this post. I really liked this fabric and it was easy to work with. I bought seven yards, assuming that I needed one yard per chair, but I only used about 3/4 of a yard per chair, and I was being very generous with it. I also wanted to make sure that I had enough fabric to start and finish the project.

I removed the screws from the metal frame that were attached to the cushions. I laid the top of the cushion facing down on the wrong side of the fabric, as shown below. I cut the material and left 5-6 inches on each side all the way around. The best way to give yourself enough material is to pull the fabric over the edge of the current fabric line before you cut it off the bolt. You’ll also need a staple gun and the correct staples that fit because they can vary in size. I have a few different staple guns, but this one is the most comfortable to use. Of course, I bought mine at Sears, but I was able to find the same one on Amazon.

I started stapling the material to the bottom, top, then all four sides to keep the material in place. By doing it this way, the corners were easy to manipulate and lay flat, so the end result looks smooth and professional.

Here is what both sides of the cushion look like after I finished stapling all the material down. Be sure to pull the material tightly as you staple all around the cushion then trim away any extra material so that the cushion will fit right back on the metal frame when you put it back together.

Here it is, in just a few minutes. I updated this chair to the 21st century, and saved money doing it!

What do you think? It was easy and fun to do and looks amazing. Please let me know if you have any questions on this project, as I would be happy to help.

Xo Christine

by

How I Painted My Kitchen Table With General Finishes Milk Paint

I love buying old items at the thrift store cheaper than actually marked! Now don’t get me wrong, we donate quite a few items every month. I just really love finding a deal! At my local Salvation Army, I found this unique wood table for only $46.00!

I first fell in love with table for the antique look of the legs and trim around the table, but one thing I didn’t know was that the table expanded. This is great because we have four children and this gives them a little more space when we sit around the table. But I also found that I was missing a foot of trim when the table was expanded, so I looked into having a piece made for both sides of the gap. I found that it was $75 per foot, so I threw a runner over it instead to cover the gaps!

I started by lightly sanding the table and legs with a 220 grit to remove the shine, then wiped the whole table down with a 50% rubbing alcohol and 50% water mixture, to remove all dust for a clean surface to spray on. Now, I was painting this table just before our oldest daughter’s first communion, so I never took a picture while I was painting the table, sorry! But I actually set up the tent that I bought with the Wagner Home Decor HVLP Sprayer and Spray Tent Comb at Home Depot in the house and sprayed this table right in the dining room. I used General Finishes Milk Paint in Driftwood and the Snow White which I was able to find at a few repurposing stores in the area, and if you click on either one of the General Finishes links you will be able to find a retailer around you too! 

Just like the kitchen cabinets, I applied three light coats of paint with the sprayer then sealed the table with three coats of the High Performance topcoat from General Finishes.    

Here is my table completely finished, but for some reason my runner was not in the picture! Anyway, I thought this table turned out great and the paint is flawless and durable.  

Please let me know if you have any questions on this project as I would be happy to help! 

Xo Christine 

 

by

Repurpose Your Old Wood Picture Frames

I love repurposing old items into new usable pieces. Before I get rid of any old items I don’t use anymore, I try to come up with ideas on how to reuse them.

When we lived in Massachusetts, there was an abundance of vintage shops that had so many great finds. There was this one place I would always pass as I went back and forth to work which had a variety of old wood picture frames that I fell in love with. Not knowing what I would do with them when I purchased them, but knew I had to have them. At the time I owned a little jewelry store and used the picture frames to display jewelry on the wall. After I sold the store and moved back to our home town, I was determined to use these frames again but didn’t know what I would do with them. A family friend that I happen to do many different projects for had asked me to make her a chalkboard for her eyelash studio. Instead of just making a plain chalkboard I thought I would elevate the look by framing the board with my old wood frames. I had two frames that I thought would be perfect for this project.

As you can see in the picture above I had spray painted both of these frames gold, which I actually painted for my store in Mass. These frames have a lot of small detail to them, which I really wanted to highlight to pull the whole project together.

I resprayed both frames gold, to touch up any nicks or scratches the frames may have had while they were in storage. I used Rust-Oleum Metallic Gold Rush that I found at Home Depot. Although I used the same color, one wood frame was a little darker than the other, to begin with, which is why the color looks a little different and also the lighting, unfortunately, was not great either. I then attached the chalkboard pieces, which I also purchased at Home Depot where they cut them to size for me. I used Liquid Nails for small projects, to adhere the chalkboard piece to the back of the frame and let it dry overnight.

When it was completely dry I was able to stand the frame back up and painted the small details of the frame with Deco Art shimmering silver acrylic paint and Deco Art glorious gold paint from Michaels, with a small paintbrush by Craft Smart.

What do you think? Lis loved these chalkboard picture frames for her studio, and I loved that I was able to repurpose pieces that I already had. Please let me know if you have any questions about this project, I would love to help!

XO Christine