The Navy Door

Decorate. Repurpose. Restore.

by

How I Painted My Brand New Kitchen Cabinets with General Finishes Milk Paint

Last year after looking at so many different homes, we decided that we were going to build a house. As we were picking out the finishes for the house, I wasn’t crazy about any of the color selections that were being offered for the kitchen cabinets. The one cabinet I liked was completely outside the budget. So we agreed that we would just get the natural color cabinets and paint them. Prior to this decision I had already done some research on painting wood pieces and cabinets, so I thought I could do this! Mind you, I have never painted cabinets before, and I must say I learned a lot in the process. In this post I’m going to show you what I did to my new cabinets, and I absolutely love walking into my kitchen every day!

Here are a few pictures of my cabinets when we first unpacked them. For me, it was much easier to spray the cabinets before they were hung, if you have the opportunity to do so. I did have to touch up some paint and add the top coat after they were hung. You can paint your cabinets if they’re already hung, but I found it to be a little more work than when they were not hung.

After unpacking the cabinets we followed the lay out of the kitchen cabinets and determined what panels would be showing and which ones would be hidden (against the wall or another cabinet). By planning this out, it helped save on paint, and most of all time! We then lightly sanded the parts of the cabinet that I was painting, with a 220 grit to remove the shine, then wiped them down with a 50% rubbing alcohol and 50% water mixture, to remove all dust for a clean surface to spray on.

I had a lot of cabinets to paint and a limited time to do them before the carpenter was scheduled to put them up. So I decided to use a spray gun called Wagner Home Decor HVLP Stationary Sprayer at Home Depot. I purchased the unit that came with a tent (only $20 more). This sprayer was easy to use, but may not have been the right choice for such a large project. There were a few times that the sprayer would either get stuck, or would not evenly spray. After a little more research I learned that if I strained the milk base paint with a filter from Home Depot, which is where I purchased mine, I had fewer issues with the spray gun.

You’ll see in the images below, that we used Green FrogTape to tape the inside of the cabinet off, to keep it clean. I took the tape and stuck it around inside trim of the cabinet, with the sticky side of the tape facing out, then cut a piece of plastic drop cloth that I purchased from the Dollar Tree, to the green tape.  You’ll see I also used the tape to cover any holes or gaps to prevent paint from spraying into the cabinets.

You can see in the second picture above that it looks as if the paint was running. That area seemed to be skipped over when we were sanding, which is why it looks like that. Lucky the General Finishes Milk Base Paint is very forgiving, thankfully! When you apply light coats of the milk base paint with the spray gun, it gives it an amazing finish. I applied three coats of paint, which I mixed with two colors to make the color I used, and three coats of High Performance top coat. I wouldn’t recommend using any less, from my personal experience.

It was hard for me to find the color I wanted.  At first I was going to do Queenstown Gray or Driftwood but our whole house is painted two different shades of gray. As I debated on what color to pick, it occurred to me that I really wanted something rich, that stood out, but flowed with our house too. It took me a few attempts, but here is how I figure it out.

It’s very scientific, I know! I just took a drop of all the colors I liked, and started mixing one or two drops together until I fell in love with the color I created, which was one part of Coastal Blue and two parts of Queenstown Gray. I thought I mixed enough the first time for my project, but actually come up short. My suggestion is to buy a little more than you think you’ll need and mix all at the same time. For my project, I bought about a gallon and a quart of paint.

Here is what the cabinets looked like after they installed them. Although I really liked the dull look, to keep the paint in its best condition you have to apply a topcoat. I used three coats of the High Performance topcoat. General Finishes does have a Flat Out topcoat which I think would be a great topcoat for the cabinets, if you were looking for a duller/flatter look. They recommend that you use the Flat Out on top of the high performance topcoat.

Here are the kitchen cabinets completely finished with topcoat and hardware. I’ll share the hardware refinishing information with you too in my next post!

Please leave any questions or comments below, as I would be more then happy to help!

Xo Christine 

by

How I Painted My Kitchen Table With General Finishes Milk Paint

I love buying old items at the thrift store cheaper than actually marked! Now don’t get me wrong, we donate quite a few items every month. I just really love finding a deal! At my local Salvation Army, I found this unique wood table for only $46.00!

I first fell in love with table for the antique look of the legs and trim around the table, but one thing I didn’t know was that the table expanded. This is great because we have four children and this gives them a little more space when we sit around the table. But I also found that I was missing a foot of trim when the table was expanded, so I looked into having a piece made for both sides of the gap. I found that it was $75 per foot, so I threw a runner over it instead to cover the gaps!

I started by lightly sanding the table and legs with a 220 grit to remove the shine, then wiped the whole table down with a 50% rubbing alcohol and 50% water mixture, to remove all dust for a clean surface to spray on. Now, I was painting this table just before our oldest daughter’s first communion, so I never took a picture while I was painting the table, sorry! But I actually set up the tent that I bought with the Wagner Home Decor HVLP Sprayer and Spray Tent Comb at Home Depot in the house and sprayed this table right in the dining room. I used General Finishes Milk Paint in Driftwood and the Snow White which I was able to find at a few repurposing stores in the area, and if you click on either one of the General Finishes links you will be able to find a retailer around you too! 

Just like the kitchen cabinets, I applied three light coats of paint with the sprayer then sealed the table with three coats of the High Performance topcoat from General Finishes.    

Here is my table completely finished, but for some reason my runner was not in the picture! Anyway, I thought this table turned out great and the paint is flawless and durable.  

Please let me know if you have any questions on this project as I would be happy to help! 

Xo Christine 

 

by

Knobs, Knobs, Knobs!

I consider myself to be a smart shopper. Don’t get me wrong I like really nice things and I’m willing to spend the money, but if I can save myself some of it, I’m all about that too. I realized after I painted my cabinets I would need hardware for them, but didn’t realize that you could easily spend a few hundred dollars on a piece of metal that opened and closed your cabinet door.

I looked on all the major sites that you could think of for the knobs that I wanted and of course, at the time I couldn’t find them in the color I was looking for, the story of my life! I happened to be at Target and spotted these hammered looking knobs that I loved, but only came in silver. They were on clearance, so I thought I could just paint them. I also found this half-moon drawer handle at JoAnn Fabric, that I also had to have. The two places that I would have never thought I would find the handle for my house, but there they were.

Here are the knobs I bought from Target. It is a little hard to tell but these knobs have a hammered look to them, you will be able to see the difference in the finished picture.

I unpackaged these knobs and stood them up on a wooden skewer that you might use for chicken kabobs. They are cheap and I already had them at home! I stuck them in a block of styrofoam while I sprayed them, and let them dry there as well. I took them out of the styrofoam, while still on the stick and lightly touched up a few spots that I had missed. I used Krylon Foil metallic copper spray paint that I found at Pat Cantans. Although this store is no longer in business, I attached a link for Walmart, where I found it for the same price.

After giving these items time to dry, I coated them with Zinsser Bulls Eye Shellac in clear from Home Depot. Be sure to follow the directions on the back of this bottle, because if you tend to get too close you will get a different finish, but I still went with this product because it is extremely durable for everyday usage.

These half-moon handles are from JoAnn Fabric, and although they were not on clearance, I was able to save some cash by using their coupons that you can find on their website or their app. I simply laid these handles out in a shallow box with newspaper and sprayed each handle to match the knobs, and added the same shellac sealer to finish out this project.

After two days of letting these knobs and handles dry, we attached them to the brand new kitchen cabinets that I refinished, and my bathroom cabinets. I love the way they turned out! Please let me know if you have any questions on this project, I would love to hear from you!

Xo Christine